![]() The device list allows access to all devices in the network and selection of 24 devices for monitoring. ![]() The app can monitor up to 24 channels in mixed configurations. For Sennheiser 2000 series and evolution wireless G3 devices Firmware 1.7.0 or higher needs to be present on the receivers to support the remote control protocol. Either ScanPack will unlock the RF Inspector for sample accurate readout of the scan data at your fingertips.ĭuring start up RF Control will scan your network for connected devices. The *.csv file I can be loaded from third party software for frequency coordination and planning. With the additional ScanPacks the scan data can be stored as *.csv file and uploaded to your personal Dropbox or sent as attachment via email. The frequency plot can be used to drill down the spectrum and look for free frequencies. The scan window allows you to use one of the recognized Sennheiser devices to scan the RF environment. The full screen plot window of the iPad version allows to scroll through the recorded RF and audio levels to look up for problems and drop-outs even after hours of recording.Īll relevant parameters can be remotely controlled: (Shure: Low Bat, Interference, RX Mute, TX Mute, Enrcryption mismatch, AF Peak)Ī plot of the RF and AF levels is displayed over time, making it the perfect companion for walk tests and spotting dropouts in your audio. (Sennheiser: Low Bat, RX Mute, TX Mute, RF Mute, AF Peak, NoLink, Encryption mismatch) Remaining battery time (Shure with Li-Ion battery, EM6000) Sennheiser: EM 3732*, 2000* series and evolution G3 and G4* wireless receivers.ĭepending on the manufacturer of the receiver wilSmoTe supports monitoring of the most relevant parameters including: ![]() ![]() The intuitive user interface provides a quick overview of the most vital parameters of your wireless receivers.ĭedicated screens have been carefully developed to give you control to parameters that are relevant in a live situation while securing access to the ones that might be harmful to the safety of the system.įollowing devices are supported by utilizing the manufacturers remote control protocols: RF Control remotely controls up to 24 channels of Sennheiser* and Shure* wireless receivers in one application, side-by-side.
0 Comments
Leave a Reply. |